top of page
!
Widget Didn’t Load
Check your internet and refresh this page.
If that doesn’t work, contact us.

SEALED CONCRETE

OPTIONS

CONCRETE GRIND AND SEAL, CHEAP FLOORING, CHEAPEST FLOOR
GRIND & SEAL

During this process, we begin grinding with a 30 grit or 70 grit metal bond diamond and finish the concrete floor with a 50 grit resin bond diamond to smooth out the concrete and remove any scratches.  This process can be stained and is ideal for our budget minded customers who are looking for a polished floor at a more affordable price.

SEALED CONCRETE
SCRUB & SEAL

This process is only used when the concrete is smooth troweled or in "like new" condition.  We utilize an impregnating sealer that does not create much shine, but does  promote stain resistance. This is our most affordable floor.

THE PROCESS

Grind & seals, also referred to as "topical polishes" utilize a short version of a mechanical polish.  We do 2-3 grinding steps to remove the top layer of the concrete, and then smooth the concrete out with a higher grit level.  This allows us to flatten the floor, remove impurities, do patch work, and it opens the pours to accept stain and sealer.  There are several types of sealer which will be listed below.

HOPCAT FLOORS, FLOORS THAT SHINE, STAINED CONCRETE, COLORED CONCRETE FLOOR

Acrylic sealer

Acrylic sealer offers a matte to semi gloss appearance and  a moderate amount of protection.  It will require at least 2 coats of wax as a sacrificial sealer for more protection. It is also low VOC.  Dry time is 30-60 min per coat.

WB Urethane

Water based Polyurethane a quickly turning into the sealer of choice.  It offer a gloss level of satin, semi gloss, or gloss.  It only requires 2 coats and offers excellent durability with moderate scratch resistance and high stain resistance.  It is also low VOC. Dry time is 6 hours per coat.

Polyaspartic

Polyaspartic is a hybrid epoxy urethane product.  It has a gloss appearence and can be pigmented to give a solid color "look" .  It offers moderate scratch resistance, and high stain resistance and requires 2 coats.The VOC is high.  Dry time is 1 hour per coat.

Epoxy

Epoxy sealer is our highest gloss sealer.  It is a 2 coat system and may require an additional topcoat like polyaspartic of WB urethane for added protection.  Epoxy give the floor a beautiful clear coat appearance.  Low VOC.  Dry time is 8 hours per coat.

COLOR CHARTS

!
Widget Didn’t Load
Check your internet and refresh this page.
If that doesn’t work, contact us.

WATERBASED STAINS

CONCRETE DYE

WHY SEALED CONCRETE?

Beautiful Results

A transformation from old and damaged concrete to a shiny and colorful work of art.

CUSTOMIZABLE

Available in wide variety of colors and designs. 

Longer life-cycle

Maintains shine and luster for many years.  

Cost Savings

In some cases, less expensive then traditional flooring.

Moisture Resistant

Allows the floor to breathe while resisting stains

Easy to clean

Resist dust, dirt and allergens. Cleans easy with a microfiber wand, and no grout lines.

OUR WORK

!
Widget Didn’t Load
Check your internet and refresh this page.
If that doesn’t work, contact us.

As industry leaders and professionals in our trade, we are often recognized and sought after to participate in projects that require a specific skill set.  Here are some of our clients who have benefited from our knowledge and expertise in polished concrete, and epoxy coatings.

PROUD MEMBERS OF

3.jpg
untitled.png
untitled2.png
Light and Shadow

Start Your Project Today!

For more Information or to speak with an expert call 888.590.1101

bottom of page